Products Approved By WorkSafeGEAR.com

Free Harness Inspections From 29/02/11 to 04/02/11

*Complies with AS 1891 series.

*Harness will be inspected by a competent person.

*Harness will be tagged and recertified for use.

*Freight to be covered by customer to and from WorkSafeGear O'Connor.

Please call +61 (0)8 9314 3377 for more info.

Extract from AS1891

9.2 OPERATOR INSPECTION AS1891

The following items shall be subjected to inspection by the height safety operator of each item before and after each use to ensure that it is in a serviceable condition: Where an operator is not competent to carry out this inspection, e.g. an operator in training, the inspection shall be carried out by an operator who is competent or a height safety supervisor.

Inspection shall be by sight and touch. It shall include the opening of any equipment where access for daily inspection is provided, to ensure that internal components are in satisfactory condition. This requirement includes the opening or removal of temporary rope or line protectors, to enable rope to be properly inspected. Operation of the locking mechanism on fall-arrest devices shall also be checked.

It should be impressed upon operators that their lives depend upon the continued efficiency and durability of their equipment and that a proper inspection at each time of use is their first line of defence against the hazards of faulty equipment.

Training and assessment of height safety operators shall include competency in carrying out the operator inspections specified in this Clause.

9.3 REGULAR SCHEDULED PERIODIC INSPECTION

9.3.1 General

All items of equipment which are in regular use shall be subjected to periodic inspection and where applicable, servicing, at the manufacturer’s recommended intervals. The intervals given in Table 9.1 for each item, shall apply in the absence of such recommendations. The inspection and servicing shall be carried out by the person specified in Table 9.1.

Items used under harsh conditions, e.g. in wet, dusty, abrasive or corrosive environments, shall be inspected more frequently, generally at twice the frequency specified in Table 9.1.

NOTE: Product Standards for each of the items dealt with in this Clause place an obligation on manufacturers to provide maintenance instructions and recommended maintenance/inspection/ service intervals.

9.3.2 Harnesses, lanyards and associated equipment

Items shall be checked in accordance with manufacturer’s instructions to determine whether there is excessive wear or any other faults liable to render the item unsafe during a fall arrest.

Associated Files

Inspection BookV1.pdf